|
|
#8
11-06-2012, 09:18 PM
|
|||
|
|||
Alright, it took a 1 7/8 inch socket and breaker bar and a hammer to get em out but they are out. Obviously they are not original but these suckers would probably never leak with how thick they are. The hull bottom is 3/8 inch thick.
     On a separate note, as suspected the forward fish box drain was sealed at some point. I can't tell where it came out on the hull. Probably due to the 27 layers of bottom paint on there. 
|
|
|
Threaded Mode