You can see the bottom of the transom as I stuffed a bunch of 1708 scrap ..cause as the resin was kcking off it would become a bit viscous . it is hard to get the mix just right especially with such a large part to bond with out it hardning to fast.. So i just kep stuffing the glass in there so that the resin would stay in the transom and encapsulate the bottm of the transon. When the outerskin is done. i will pour a thicken mix of epoxy and cabisol to fill all the voids on the inside. and pull a vac so to let it seep in all the cavities
|
03-15-2013, 08:32 PM
Hybrid Mode
