1987 Scepter

[OilFieldMan]

I managed to get the all of the thru hulls for bilge pumps mounted and hose clamped.



I have two rule 2000 bilge pumps, one is on Auto from an Ultra Switch. I've also installed a Rule Tournament series bait well pump with a port for the wash down. This has been attached to a 1" Seacock with a piece of plywood to pad the seacock in. This was thoroughly gooped with 5200. Also a Jabsco pressure switched washdown pump was installed. I didn't like the bulkhead fittings offered through West Marine and Jamestown so I used a hardware store faucet and mounting it on teh Starboard aft corner hatch.





I also purchased some plastic goodies from SeaSnell