Bracket modification

[RUSTYNTABATHA]

Originally Posted by Bushwacker

Rusty,

If you're considering a Hermco bracket, you might talk to Don about the possibility of raising the top of the motor mount surface another inch or so, and also putting a bulge in the swim platform just forward on the motor mount surface to prevent interference with the lower motor mount bolts. I think that's what's required to mount a 25" motor with the AV plate 5" above the keel. Denny

definately going hermco if / when i do the bracket ! yalll are going to have to make up my mind !!!! leaning back that way again though.... I would kick myself for doing the transome to 25" and new power and then want the bracket.... gotta make up my mind before i cut / chop / rebuild... lol