who makes a good custom CC windshield - Page 2

TooFly · #11 09-12-2013, 09:02 PM

Quote:

Originally Posted by CHANCE1234

Thanks too fly. That's also what I would consider local. What's the best way to go about this as I don't have an old windshield I can take off and duplicate. Should I just trailer the boat to them and have them measure or should I do a drawing and measurements myself. Thanks.

I'd call Tony to ask. But he'd probably want to take measurements at his shop. I had him put a windshield on my first boat, with nothing to replicate, and it came out exactly as I wanted it.

Paul

TooFly · #12 09-12-2013, 09:04 PM

Wow. Nice work, thehermit!

CHANCE1234 · #13 09-12-2013, 10:28 PM

Yeah, nice work, but not too confident in my abilities. What thickness plexi did you use for that?

Sceptre20 · #14 09-15-2013, 09:14 AM

I made my own on the 23' that I had using 1/4 Lexan.I found the Lexan much easier to work with than Plexiglass.

thehermit · #15 09-15-2013, 06:39 PM

It was wicked easy. I think it was 3/8...but I would have to ck. I think the plastic cost me $80 bucks. Good luck

CHANCE1234 · #16 09-15-2013, 06:46 PM

Hmm, maybe ill have to experiment...

#17 10-10-2013, 09:41 AM

Hi. May I suggest Prospect Plastic in Pompano, Marcy Million is a contact there. They made two for me. $150 then. Furnished me with standoff buttons, etc. Don

Calibogue · #18 10-14-2013, 10:00 PM

What dimensions you looking for?

CHANCE1234 · #19 10-15-2013, 11:57 AM

i'll have to check. I took about 8 inches out of the stock console and built up the top a little for electronics/gauges.

sidelock · #20 10-19-2013, 05:11 PM

Quote:

Originally Posted by thehermit

It was wicked easy. I think it was 3/8...but I would have to ck. I think the plastic cost me $80 bucks. Good luck

How does it look in the corners where you applied the heat to bend it, are there any bubbles or is there any difference in clarity of the lexan ?