I must like punishing myself

[billythekid]

Picked up some material yesterday for the transom and the inner hull. I decided to use a product called Corelite for the transom, It was recommended by a friend who has done a lot of restores in his time. Its about the same weight as Penske or coosa board, But it cuts a lot easier. It looks like Azek and almost cuts like it, but you cant compress it like azek. It is rough on both sides.

I ripped a pieceof 1/8 Luan down to use as template material, So out came the shears, heat gun and pencil and off I went making a template.