Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > Recovered Threads
FAQ Community Calendar Today's Posts Search

Notices

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #4  
Old 11-07-2013, 10:10 PM
boatervalpo boatervalpo is offline
Recovered
 
Join Date: Sep 2013
Posts: 7
Default

Would a 125hp at 400lbs cause much issue / change of ride?

Quote:
Originally Posted by Bushwacker View Post
Amen to what Chance said. Reason is these hulls are extremely efficient, don't need a lot of power, and will plane at about 12 mph with a 300 lb motor! Moesly designed the 19/20' hull in the mid-60's for the lightweight motors available at the time, which didn't exceed more than about 110 hp and 300 lbs. If you hang a 500 lb 4-stroke on it, you will screw up the balance of the boat, raise it's min planing speed to the low 20's, and end up with a worse ride and handling than if you stay with the original configuration. Adding a bracket will make the situation even worse and require many other changes to get an acceptable ride and low speed planing performance.
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:52 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft