Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > Recovered Threads
FAQ Community Calendar Today's Posts Search

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 01-12-2014, 03:31 PM
Bigshrimpin Bigshrimpin is offline
Senior Member
 
Join Date: Dec 2002
Location: Onset, MA
Posts: 2,712
Default

Wow . . . just read that article.

Spark Plugs: $146.00
Water Pump: $375.00

????????????????

Same job done yourself on a 1980's blackmax = under $40 in parts and less than 1 hour of your time.


NGK BU8H plugs cost $2.25 each (5 minutes of labor)

Water Pump is $25.98 with the housing delivered ( 45 minutes going slow )
http://www.ebay.com/itm/Water-Pump-I...-/300996123884
Reply With Quote
  #2  
Old 01-13-2014, 08:07 AM
kmoose kmoose is offline
Senior Member
 
Join Date: Jul 2006
Location: Ocala, Florida
Posts: 1,817
Default

Quote:
Originally Posted by Bigshrimpin View Post
Wow . . . just read that article.

Spark Plugs: $146.00
Water Pump: $375.00

????????????????

Same job done yourself on a 1980's blackmax = under $40 in parts and less than 1 hour of your time.


NGK BU8H plugs cost $2.25 each (5 minutes of labor)

Water Pump is $25.98 with the housing delivered ( 45 minutes going slow )
http://www.ebay.com/itm/Water-Pump-I...-/300996123884
Yep, those are some pretty outragous prices but the actual cost for maintaince parts is not really that different for any modern outboard. I do my own water pump once a year whether it needs it or not. That plugs, and zinc. My water pump only takes about 30 to 40 minutes as well and I have yet to ever require a housing. Full kit: $34.98...
http://www.ebay.com/itm/Water-Pump-I...-/300979087956
As far as oil changes go I spend whatever 8 quarts of Rotella costs from Sam's and a $5 fram filter from Wally world. Pump out, screw off, screw on, pour in, have another beer and light a cigar..... Even an old Merc guy could do it. That article is pretty laughable... The same people writing that rag think cat hulls are the greatest thing since sliced bread as well and write dozens of pages proving that too.....

The original motor on my rig a a 275 V8 2 smoker. I don't think you could pour gas and oil overboard faster than it could burn it. At a 28 knot cruise it barely got 1 nautical per gallon on a flat day. It did have it's good points though... It was reliable as the sunrise and nobody could follow you to your spot due to the toxic fog bank trailing 2 nautical miles behind. The best feature was the cowl! If needed it would double as a 7 man life raft or could be traded in Cuba for a pallet of Cohiba churchhills and 2 dozen hot empanadas.

Now I only get 2 nautical and a 30 knot cruise and none of the above fringe benefits.... What was I thinking...
Attached Images
 
__________________
[b]The Moose is Loose !
Reply With Quote
  #3  
Old 01-13-2014, 09:47 AM
DonV DonV is offline
Senior Member
 
Join Date: Jul 2004
Location: Apollo Beach or Islamorada
Posts: 3,488
Send a message via ICQ to DonV
Default

Yes Sir the old V-8 OMC engines required a 1/2" fuel line. Back in 1986 or so one of the local OMC dealers here in Gibsonton put two of these monsters on the back of a 29' Aquasport, made a few magazines as an alternative to I/Os. Did NOT last long, I asked them why they took them off and they told me the boat did not a big enough gas tank to feed them.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:43 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft