i think i have boobed

[hermco]

You can design it any way you see fit. The end result is the transom at 24" setback should be at least 27" up from the keel.

[dave2400]

Originally Posted by hermco

You can design it any way you see fit. The end result is the transom at 24" setback should be at least 27" up from the keel.

hi thanks for the reply that makes it clear a.t.b dave

[hermco]

Originally Posted by dave2400

hi thanks for the reply that makes it clear a.t.b dave

That is assuming you are using a 25" shaft length outboard. I should have specified that.

[dave2400]

Originally Posted by hermco

That is assuming you are using a 25" shaft length outboard. I should have specified that.

ops ops my boob i should have sead my outboard is a 125 force with a 20inch shaft sorry a.t.b dave

[hermco]

No worries. You will have to make the transom of your 24" setback bracket at 22" above the keel line then.

[dave2400]

Originally Posted by hermco

No worries. You will have to make the transom of your 24" setback bracket at 22" above the keel line then.

thank you i would have made a right booby a.t.b dave

[gofastsandman]

Originally Posted by dave2400

ops ops my boob i should have sead my outboard is a 125 force with a 20inch shaft sorry a.t.b dave

The last of the V8 interceptors.