lamination question

[Basketcase]

My second stringer came out perfect. I skipped the squeegee and just rolled it. I tried using my fiberglass roller but the surface was too irregular and was making matters worse. I put a tiny bit of cabosil in the resin and worked the roller till it was just about jelly. Came out great. Thanks guys.

[FAS]

its always good to wet the surface to be glassed, and also use a wet nap roller,and wet the backside of the 1708 as you lay it down.just fold it up 1/2 at a time,wet the back and lay it down.this will help it saturate all the way through.looks like your layup is fine...

[shine]

for hand layup, thats not too bad