|
|
|
|
#1
10-31-2014, 02:49 PM
|
|||
|
|||
Flexpat thanks, that's actually my first try at a mold. I just followed what other had done on here. I would do a few things different next time. I put the mold for the bracket tub together with screws so I could take it apart easily and save the mold. Next time all I'll have to build it a mold for the platform.
|
|
#2
10-31-2014, 02:57 PM
|
|||
|
|||
|
The gel coat is in really good shape on the hull just oxidized. I wet sanded the sides quick and hit it with compound just to see if it would come back. It looks pretty good. In the spring I will really wet sand and compound the hull. I got some new decals made and put on.
|
|
#3
10-31-2014, 03:05 PM
|
|||
|
|||
|
I gel coated the whole cap including both dashes. I still need to wet sand and polish everywhere there will be no non skid. I will be shooting gel with grit for the non skid. This I'll do over the winter and spring. The fuel tank is the original that I sanded and coal tar epoxied. It was in really good shape.
|
 |
|
|
Hybrid Mode
