1974 SeaCraft 23' SF

[gtrkev]

Grinding away on this project, literally. The seat supports are in. Filling in the square floor hatch so a bigger floor hatch can be made later that conforms to the outline of the seats. You can see the new hatch outline on the floor in pencil. I decided to make the seat in the center a little bigger (than my blue-tape-on-the-floor version), that will give me enough room to put a subwoofer and less cramped when your walking towards the bow between the seats. Also, removing old bow eye. New rub rail sample vs. old rub rail, big difference. 50' rub rail in a roll. And a brass thru-hull transducer.

That's all. ...for today.

[gtrkev]

Anchor Locker location is marked off. The bow light is just loose, will be straightened when attached.

[gtrkev]

Holes in the bottom of the boat are filled in. This is inside the in-floor bait well. Thank goodness he only had a 6-shooter... I've seen SeaCraft's with many more holes in the bottom for bait, they still float doe.

[gtrkev]

I'm moving the steering wheel to the left side of the Center Console. Re-designing layout. Probably need new gauges and switches to make it look good.

[gtrkev]

A few places need some fiberglass touchup. And a random photo from under the gunwale.

[gtrkev]

Latest photos of the front seat progress... on the SeaCraft 23 FS (Front Seating). Also a shot of the subwoofer box seat.

[gtrkev]

SeaCraft 23 Front Seats -- taking shape!