![]() |
|
#1
|
|||
|
|||
![]()
Alright finally back to work on this sucker! Got quite a bit done on the console while working midnights. Raised and cored the bottom. Changed the top to accommodate my electronics and other stuff.
|
#2
|
|||
|
|||
![]()
Finished installing the bulkheads and boxes for fuel fill lines. Also put a backing block for the d-ring.
|
#3
|
|||
|
|||
![]()
Used a crane to flip it over hokked to the front d-ring and an eye bolt in the drain plug hole. Worked pretty well. Couldn't manage to get any pics of the process. The keel damage was a bit worse than I originally thought and the repair that was done was even worse.
|
#4
|
|||
|
|||
![]()
Got the old repair ginded out and put some fresh glass in and shaped pretty nicely. Also had a little repair to fix on one of the strakes. Sanded the entire hull once and filled all the imperfections with polysilk. Probably one more round of sanding and filling till I will feel comfortable to start rolling on the new gelcoat.
|
#5
|
|||
|
|||
![]()
Andre...
Looks great, but you have no excuse for not showing up, living 4 blocks from all of us being at the Sportsmens Lodge and Ferndale Lodge at this weekends gathering .... ![]() You missed some great chow last night.. ![]() I was almost gonna come hunt you down!!
__________________
See ya, Ken © |
#6
|
|||
|
|||
![]()
Wish I had know you were here! You should have hunted me down!!!
|
#7
|
|||
|
|||
![]()
Damn Bones, I guess that "gathering" section on our forum is too tricky. We need to get our moderator, "crash" Danny, to work on simplification!!
![]() |
![]() |
|
|