|
|
#5
05-01-2017, 08:16 PM
|
|||
|
|||
Thx for the PDF = trying to read the tiny small print on the can is almost impossible. I just dropped the tabs off to my sand blaster ( this is a treat to myself as I just wasn't into the sanding part of this ! ) - and then I'll do the IP2000e process.
I did speak to Interlux today to ask if I should put Primocon primer on before the antifouling - the answer was a definitive NO. He said go straight with Trilux - 
|
|
|
Threaded Mode