![]() |
|
#1
|
|||
|
|||
![]()
Can somebody tell me why I only get the link? ID10T problem?
__________________
1975 SF18/ 2002 DF140 1972 15' MonArk/ 1972 Merc 50 http://i833.photobucket.com/albums/z...photos/SC3.jpg |
#2
|
|||
|
|||
![]()
__________________
Current SeaCraft projects: 68 27' SeaCraft Race boat 71 20' SeaCraft CC sf 73 23' SeaCraft CC sf 74 20' SeaCraft Sceptre 74 20' SeaCraft CC sf |
#3
|
|||
|
|||
![]()
I have a similar drain on my '76 MA. The through hull only drains when the boat is underway, and with any substantial weight near the bow, the box would fill(partially)with water. Channeling that water towards the bilge seems like the best idea.
I'm not looking to make any major changes to this part of my boat yet so I used a champagne cork(which fit perfectly)to plug the through hull, lined the recesses of the door with a rubber seal, and leave a sponge in the drain area to collect any rainwater that might makes its way in. This is obviously a temporary fix but the fishbox has been bone dry while the boat has been on a mooring for the past month. |
#4
|
|||
|
|||
![]()
Thanks, Frizz!
__________________
1975 SF18/ 2002 DF140 1972 15' MonArk/ 1972 Merc 50 http://i833.photobucket.com/albums/z...photos/SC3.jpg |
#5
|
|||
|
|||
![]()
Thanks for the quick replies!
I think I'll start with replacing the rubber gasket on my lid and the sponge trick before I go drilling any holes. |
![]() |
|
|