Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > Recovered Threads
FAQ Community Calendar Today's Posts Search

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 01-14-2018, 11:56 AM
Bracker Bracker is offline
Recovered
 
Join Date: Jan 2018
Posts: 24
Default

Thanks for the replies. One of the reasons I wondered was because I’d seen this post by Vezo, Part II: “Also, after discussing my MA with Denny (Bushwacker), he believed mine may have been built late in Mr. Potter’s era, because the gel coat is so thin that it has “print through” of hand laid woven roven. He proposed possible cutting back on the thickness prior to sale of his company. Having hand laid quite a few Jersey Speed Skiffs over the years, I came to like the look of my hull. Interesting.”

I’m new to SeaCrafts. After selling my flats skiff a few months ago, I wanted something I could use for some light offshore fishing and I came across SeaCrafts and started researching them. I’ve fallen in love with their heritage/legend. I’ve pretty much decided on a 20 SF; just taking my time searching for the right one.
Reply With Quote
  #2  
Old 01-14-2018, 01:39 PM
Capt Terry Capt Terry is offline
Recovered
 
Join Date: Jan 2015
Posts: 573
Default Potter Changes

Sometime between maybe 1973 and 1976 the decks in the 20' were raised a bit as my '76 Seafari deck is higher than Bushwacker's, now SSPbill's Restless Lady. Your feet stay drier standing astern at rest when the scupper plugs are out. I usually kept them plugged during operation and unplugged when docked overnight.
Reply With Quote
  #3  
Old 01-14-2018, 02:27 PM
jtharmo jtharmo is offline
Recovered
 
Join Date: Sep 2014
Posts: 115
Default

Crawling around my yellow ‘78 Seafari and now the Restless Lady which is a ‘72, they are almost identical to my eye from a material perspective. When cost cutting has been discussed for Potter-era boats I think it had little if any effect on build quality. Simple things like switching from a molded non-skid deck to textured/gelcoat are where I think Potter looks at being more efficient as a manufacturer. I did have some print through on the yellow Seafari but it had a few rounds of wet sanding so I can’t say it was inferior material. There will be more ply instead of balsa in later boats (all above the waterline) so moisture will migrate more quickly. Most get wet eventually though.

I don’t have a ton of time in either but they both sure feel the same from the helm in terms of quality when skipping over chop. I say raised deck is good, raised transom is good. Other than that the playing field is wide open.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:47 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft