Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > Recovered Threads
FAQ Community Calendar Today's Posts Search

Notices

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 02-16-2018, 02:07 PM
Tashmoo2 Tashmoo2 is offline
Senior Member
 
Join Date: May 2004
Location: CT
Posts: 119
Default 18 ft Seacraft deck

I found some strange things when I cut deck out of my 18ft Seacraft

1. old sneakers used to prop the liner when they applied the putty to hold it to stringers

2. the tops of both aft ends of both stringers were cut and never reglassed when they dropped liner in hull. I guess it was sticking up too high. Needless to say they were soaked with water. I cut full length of tops off and poured all new foam

I removed the aft well which was useless and installed a fiberglass hatch with gutter and gasket.

The transom had that funny smell when I drilled a test hole into the wood. I ended up replacing it from the inside.

One small job end up as a major project but now it is right.
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:53 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft