Bottoms Up 23 Build

[Kraken]

Here is console hardtop and leaning post I found. Needs upholstery and the top needs the aluminum welded up. Any know someone the can do the aluminum support for the hardtop near Cape Canaveral

[Kraken]

Molding up the deck this weekend. Using coosa blue water 15.

[CaptLloyd]

Sunshine Welding at the Port made the top on my 23. They have also made fuel tanks for me. No complaints.

[Kraken]

Thanks I’ll run up to the port tomorrow

[Kraken]

I popped the deck off the mold. Came out pretty good. Should have gotten the seams tighter on the melanin panels. There are small areas the will need touch up. All the gutters came out good. Will get it trimmed up tomorrow and test fit. I will put it aside and finish bonding in the transom.

[Kraken]

Just need to finish up the bilge before I can bond it down

[Kraken]

The trimmed deck fit great Transom will go in this weekend

[Kraken]

Test fit

[Skiblet]

Originally Posted by Kraken

Here is console hardtop and leaning post I found. Needs upholstery and the top needs the aluminum welded up. Any know someone the can do the aluminum support for the hardtop near Cape Canaveral

BT welding did mine with a hard top.

[Kraken]

2” Coosa is bonded in. I want the bracket as low to the water as possible. What is my best option for trim tabs? Tabman usually recommends 12”x12”. But I’m worried about the actuators interfering with the bracket