|
|
|
|
#1
10-22-2018, 02:08 PM
|
|||
|
|||
When I am doing small sheets and I want them smooth or pre gelcoated, I start with a 2'x4' sheet of dry erase board from Home Depot for $10.
Wax it or spray PVA. Spray gelcoat on it, let dry for a few hours (not several days!!!!! - I learned that lesson) Lay up glass, put peelply on back (great bonding surface & no blush w epoxy, allows full cure w polyester or VE) and let harden Pops right off and glass smooth (unless the wax or PVA is too thick/uneven) 
|
 |
|
|
Hybrid Mode
