Bottoms Up 23 Build

[dirtwheelsfl]

Glass bracket over aluminum any day.

The last few new Armstrongs ive seen werent very impressive. Mounting flanges out of whack (big gaps mating to the transom. Dead flat transom too trust me), welding slag painted over, lots of pinholes in the welds, nonskid lines wandering all over the place...

No corrosion with a glass bracket either!

[Kraken]

When I called Armstrong they said that production work was their priority and it would be months before I got my bracket. Sounded like one off’s were an inconvenience. I’m still trying to decide. Armstrong is out. The glass bracket is $3500....ouch

Moller have 2 center “baffles”. You can see them in the drawing.

[Kraken]

I test fit the transom cap today. The fit is spot on.

My bay boat took priority today. I hung a new Christmas gift trolling motor and gave her a much needed bath.

[Kraken]

If anyone wants the transom mold it’s up for grabs. It has a 2.5” crown and livewell plug. The 5 gal bucket plugs were destroyed unfortunately. My wife wants it gone. It works great and fit the first time. Just PM me.

[fredbrad]

where you located?

[Kraken]

Gone

[Kraken]

Busy day. I made the livewell plug. I glued together the mdf box and rounded over the corners with a 2” router bit. Sprayed it with duratech sanding primer great stuff! Sanded with 320 grit, then steel wool, rubbing compound, lastly wax.

I pulled the cap and started glassing the transom cap to the original part. I also started patching all the holes in the cap. The anchor hatch Receiver was bonded in.

I have to pick up the pace. The Miami boat show is coming up and I want to buy the Suzuki. Hoping to get a deal there.

[Kraken]

I am looking for a source for a new Suzuki DF300. I live in central Florida and I’m willing to drive within the state for a good installation and price. I know about Mike at International Marine in Orlando but need other suggestions.