More work done

[Oldboat]

Looking forward to pics. Are u the first person to do a 350? I remove my casting deck and have the console about 40 inch back from the bulkhead were step started about same place were u measure from which I believe at 40 inch is close to original location and it feels good and plenty of room between console and leaning postlwell and and between leaning post and transom crown. I did move tank forward and will have 2 both battery’s forward in consol. I have a twin Armstrong set up for 30 inch shaft so it sits about 3 inch from keel suppose to have great flotation. You have given something to think about now. I do like 2 fish 2 kits so was hoping to still have good deck space up front plus a coffin box.
Thx for your return was thinking no one liked me. Lol

[Oldboat]

Originally Posted by Oldboat

Looking forward to pics. Are u the first person to do a 350? I remove my casting deck and have the console about 40 inch back from the bulkhead were step started about same place were u measure from which I believe at 40 inch is close to original location and it feels good and plenty of room between console and leaning postlwell and and between leaning post and transom crown. I did move tank forward and will have 2 both battery’s forward in consol. I have a twin Armstrong set up for 30 inch shaft so it sits about 3 inch from keel suppose to have great flotation. You have given something to think about now. I do like 2 fish 2 kits so was hoping to still have good deck space up front plus a coffin box.
Thx for your return was thinking no one liked me. Lol

Here two pics not great and nothing is bolted down

[Oldboat]

One last thing my console is 48 deep without a seat again there will be an 80 lb coffin box up front without fish or ice. im Thinking with my console being 4 inch forward in the back moving operator forward a little and the coffin box if that works to balance out the 10 inch difference in placement. Got to get this right, any thoughts

[Vezo, Part II]

Man that thing is beautiful. Really like the spray rails.

Vezo

[castnetcracker]

picture attached.

[castnetcracker]

blurry picture, but here is the first time floating.

[Oldboat]

Wow got to be fast

[fredbrad]

Originally Posted by castnetcracker

picture attached.

Look great,how many inch from transom bulk head to back console?,I like to know that dimension for my setup with live well leaning post... with the 30" shaft is rocking to much at drift or anchor it? thanks

[castnetcracker]

Originally Posted by fredbrad

Look great,how many inch from transom bulk head to back console?,I like to know that dimension for my setup with live well leaning post... with the 30" shaft is rocking to much at drift or anchor it? thanks

83" give or take. i wouldn't know the difference at drift between the 25"/30" shaft but we are only talking about a 5" difference vertically. I would think a hard top vs soft top would change your vertical center of gravity and tippiness more than 5" of engine