Classic Seacraft stickers for Hull

[Basketcase]

Originally Posted by JUST JOHN

Example of ^Topflightgraphics work, highly recommended! I played around with fonts, character spacing etc on my own, and in the end left it up to a professional. I spaced and located the graphics/symbol where my originals were:

Decals look great but I want your vents!

[jorgeinmiami]

Nice when the boat is ready which should be very soon I'm going to need those also.

And. I also want to see if you can make the decals to replace the plastic logos for the engine cowling which are in poor shape and hard to find. I would need 2 of the Evinrude and 1 of the V6 .

Would you be able to reproduce those? And I thought of doing something in cursive like the intruder logo of the cowling

Let me know if you can do this

[Topflitegraphics]

Originally Posted by jorgeinmiami

Nice when the boat is ready which should be very soon I'm going to need those also.

And. I also want to see if you can make the decals to replace the plastic logos for the engine cowling which are in poor shape and hard to find. I would need 2 of the Evinrude and 1 of the V6 .

Would you be able to reproduce those? And I thought of doing something in cursive like the intruder logo of the cowling

Let me know if you can do this

something like this?

[JUST JOHN]

Originally Posted by Basketcase

Decals look great but I want your vents!

This is the seller I bought the vents from, and they are the same as the originals which were on my boat. I purchased "bright white", but not sure he has them listed as an option any longer; I'd message him. He also has/had gray and black vents, and sells singles, pairs, or in sets of four. I spoke with him when I purchased and he's fairly local to me... At the time I ordered he had two different usernames on ebay, but I don't recall the other one.

Here's the "off-white" ones:
https://www.ebay.com/itm/ALBIN-SILVE...w/201500325247

At the time I bought mine I second-guessed my color choice, thinking I should have gone with "off-white" to match my Johnson OB, and general old-faded look of my boat. My originals had faded and tanned quite a bit over the years, so tough to tell what was originally there. I don't recall a part number on them. Good luck and don't buy them all! lol

I added a blue boot stripe that matches the blue "swirl" since this photo.