|
|
|
|
#1
11-13-2019, 09:49 AM
|
|||
|
|||
A little overdue, but, here are some pics of my leaning post. It was powder coated in white so I media blasted where the welds were going so we could get it to the size I needed and reinforced adequately. After getting it right, I decided to paint it so I media blasted it, primed with self etching primer then several coats of Rustoleum. Took awhile to save my pennies, but finally got the cushions made. I took some 1/2" azek board to make the backing for the lp cushion. Found the radius I wanted and heated the material until I could get the bend I wanted. Worked very well! Anyway, here are some pics.
http://www.classicseacraft.com/commu...1&d=1573652651 http://www.classicseacraft.com/commu...1&d=1573652709 http://www.classicseacraft.com/commu...1&d=1573652814 http://www.classicseacraft.com/commu...1&d=1573652869 http://www.classicseacraft.com/commu...1&d=1573652920 http://www.classicseacraft.com/commu...1&d=1573652971
__________________
1975 SF18/ 2002 DF140 1972 15' MonArk/ 1972 Merc 50 http://i833.photobucket.com/albums/z...photos/SC3.jpg 
|
|
#2
11-13-2019, 09:55 AM
|
|||
|
|||
|
Sorry. I guess a downward angle changes the orientation of the pic. Ugh!
__________________
1975 SF18/ 2002 DF140 1972 15' MonArk/ 1972 Merc 50 http://i833.photobucket.com/albums/z...photos/SC3.jpg
|
|
#3
11-13-2019, 09:56 AM
|
|||
|
|||
|
__________________
1975 SF18/ 2002 DF140 1972 15' MonArk/ 1972 Merc 50 http://i833.photobucket.com/albums/z...photos/SC3.jpg
|
 |
|
|
Hybrid Mode
