![]() |
#10
|
|||
|
|||
![]()
Made some more progress today.
How to take this beast off the trailer. Step 1 get boat stands. IIRC it’s 2 mb-2’s and 2 sb-3’s from brownell boatstand.com Step 2 get lots and I mean lots of cribbing it’s about 3-4 4x6x8’s Step 3 build one huge gantry crane. It’s 2x4x8’s on bottom. 4x4x10’s for uprights. 2x8x10’s glued, nailed and through bolted for top cross member. 2x4’s cross braces on legs. 2-2x4’s nailed together to make cross braces on top. I used 1/2” x 8” galvanized bolts, washers, lock washers and nuts. Need a huge come-along and a big ratchet strap (redundancy more than capacity) ![]() Here it is! ![]() Cribbing is installed but not pictured. And let the bottom sanding begin! Maybe I’ll switch to paint stripper this stuff is dusty and nasty. ![]() |
|
|