|
|
|
|
#1
10-12-2020, 12:52 PM
|
|||
|
|||
I'm with Boo! How long did the original tank last I assume foamed in? 3/8" X 4" wide starboard strips and let the air circulate.
Quick story, I had a friend who had a 24' T-Craft (I think that was the brand) which was the worst riding boat EVER built....period, we're coming in and I noticed there was a loud clunking noise which I thought was coming from something loose in the console. Asked him what it was and he said when the gas tank would get low it would bounce around in the hull! I thought he was pulling my leg, sure enough it was just laying in the bottom of the boat. He bragged it's nice and quiet when it's over half full. Never forget that! 
|
|
#2
10-12-2020, 02:50 PM
|
|||
|
|||
|
Umm - so bare alum? Did you glue the strips to the floor or the tank? The other tanks I've done I coated with coal tar epoxy, then glued the strips to the tank. I would think gluing the strips to the floor/stringers with a bare tank might possibly let water in between. Over-thinking this?
|
|
#4
10-12-2020, 05:30 PM
|
|||
|
|||
|
I screwed them down. Got heavy with a couple screws, but it works.
http://www.classicseacraft.com/commu...1&d=1602538183
__________________
1975 SF18/ 2002 DF140 1972 15' MonArk/ 1972 Merc 50 http://i833.photobucket.com/albums/z...photos/SC3.jpg
|
 |
|
|
Hybrid Mode
