|
|
|
|
#1
05-24-2003, 04:24 PM
|
|||
|
|||
Re: Bracket Performance
It comes down to what you want to do. Im sure this will be the same as the 4 stroke / 2 stroke debate. I normally recommend stay with the set up the boat is. I have seen some boats run much better changing it over to a bracket and I have seen some need much work to make it right. If it was mine and it was a io then I would bracket it. If it was a customers I would say go back with the io. I like outboards much better. When it comes to customers boats they dont realize how much work a bracket needs. Once the job is done and the boat gets splashed you may have to spend another two or three days of relocating and rerigging for the final setup to work right.
|
|
#2
05-26-2003, 09:46 PM
|
|||
|
|||
|
Re: Bracket Performance
I'LL BE ABLE TO ANSWER THAT QUESTION SOON [img]images/icons/grin.gif[/img] . BUT ONE THING I KNOW FOR SURE,,,,THE WRONG BRACKET/OR INSTALLED WRONG. WILL CREATE PROBLEM'S. BUT THE RIGHT BRACKET/INSTALLED THE RIGHT WAY,,,,, WELL, LET'S JUST SAY I'LL KNOW SOON. LT DAN
|
|
#4
05-27-2003, 07:51 AM
|
|||
|
|||
|
Re: Bracket Performance
Its not just the mounting of the bracket. Most of the times items inside the boat will have to be relocated to get the ballance and ride right. This can take alot of time along with pulling your hair out. Once you install the bracket your changing the whole ballance of the boat and you have to get the ballance back again.
|
 |
|
|
Hybrid Mode
