|
|
#1
06-03-2003, 05:31 AM
|
|||
|
|||
Hull thickness in bilge area for 23'Sceptre o/b
I'm trying to determine the approximate thickness of my hull in the bilge area. I have a '78 Potter hull and I'm about to install a Airmar 1000 watt 50 kHz transducer for an in-hull installation and was told that the thickness of the fiberglass could mean a dB loss. It seems that for my setup the best would be about a 3/4" thickness. We mainly fish between 50 to 140 fathoms. Please let me hear your comments or advice also.
|
|
#2
06-09-2003, 04:05 PM
|
|||
|
|||
|
Re: Hull thickness in bilge area for 23'Sceptre o/b
IT IS ABOUT 1/2 " THICK MAYBE A LITTLE THICKER.
FELLOW-SHIP [img]images/icons/cool.gif[/img]
|
|
#3
06-26-2003, 12:45 AM
|
|||
|
|||
|
Re: Hull thickness in bilge area for 23'Sceptre o/b
My 78 was close to 3/4 - I was surprised. I would do a thru hull though.
__________________
Any way you measure it - dumbass is expensive
|
 |
|
|
Linear Mode
