Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > General
FAQ Community Calendar Today's Posts Search

Notices

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #12  
Old 08-21-2003, 05:34 PM
FELLOW-SHIP FELLOW-SHIP is offline
Senior Member
 
Join Date: Feb 2002
Location: Cooper City, Fl
Posts: 1,798
Default Re: LIVEWELL on a 23' CC

I got one 225 YAMAHA EFI 30" shaft mounted on the transom. Your twins will weigh more than my one. I also moved the oil tank, batteries, 15 Gal. Fresh water wash down tank under the C.C. to help move weight forward. The gas tank starts at the front of the C.C. and goes back to where the leaning post seat is screwed in that should be similar to yours. All of my deck and cap have been re laminated with 1/2 " marine plywood which would add more weight to my boat but that would also distribute it more towards the bow as well. All in all I moved the center balance line of my boat approx 18" towards the bow of the boat by all of my re distributing of weight (remember I also moved the live well from the transom to where yours is now). That could cause my stern to ride just a littler higher in the water, but remember plywood does weigh more that balsa for all the lamination I did I bet I added 200 lbs of weight to my boat.
FellowShip [img]images/icons/cool.gif[/img]
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:25 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft