Potter Bracket - Page 3

Capt Chuck · #21 04-08-2004, 11:11 PM

Signature (LINK) is a very forgiving 2 part Acrylic Urethane Enamel paint. It requires No Primers, you can Brush, Spray or Roll it On. Apply Multiple Coats in one day, apply it Out of Doors, No Waxing and best of all it is easily Repairable [img]/images/graemlins/cool.gif[/img]
I did my entire boat over 12 years ago and it still is holding up [img]/images/graemlins/cool.gif[/img] It has battle scars but I touch up here and there. I also used the Honey Teak after fighting the wood upkeep nonsense for years [img]/images/graemlins/tongue.gif[/img]

Here's a couple of photos. My hull was that mustard yellow originally [img]/images/graemlins/frown.gif[/img]

afernand · #22 04-10-2004, 08:07 PM

Capt. Chuck, how many bolts will it take to mount the bracket to your transom, and who will perform this operation? I just posted, in the "Performance" section, two questions on a Gil Marine bracket that I hope to mount on my 20' SC...I would appreciate your comments, if you have any, on my post. Thanks, aaf

Capt Chuck · #23 04-10-2004, 09:30 PM

aaf

I don't know exactly but my best guess is between 20 to 25.
I hope Don @ Hermco sees this post and he can tell you for sure as he has installed a few of the Seamark Brackets. [img]/images/graemlins/wink.gif[/img]

afernand · #24 04-12-2004, 10:48 AM

Thanks for info - aaf

laser · #25 04-13-2004, 10:50 PM

Hi aaf,
My bracket took 4 in each chamber (12) and 2 under each platform (4) and lots of 5200!! It doesn't budge

Bill

strick · #26 04-15-2004, 08:50 PM

Capt Chuck-

That boat of yours has to be one of the nicest originals I've seen on this site. Good job on the paint choice.

Strick

ScottM · #27 04-19-2004, 12:49 PM

Quote:

That boat of yours has to be one of the nicest originals I've seen on this site.

Just had the pleasure of seeing this boat over the weekend and she is cherry. Chuck has done an amazing job of maintaining her.

PipeDreamsMarine · #28 04-20-2004, 10:29 AM

Is that a International Reel handle you used for a spinner?.. too cool.....

Capt Chuck · #29 04-20-2004, 11:48 AM

YES, It was a left over in my junk drawer. [img]/images/graemlins/tongue.gif[/img]

Finster · #30 04-21-2004, 09:38 PM

Hey Generaider, we need to compair notes. I have the same boat and bracket, thought I have no time to work on mine.

I am curious to know what the boat is at the water line at the stern and what you did with the scuppers? And was yours a single or twin i/o? Mine was a twin, not that it means much at this point.