76 23 restore - Page 9

martin · #1 11-03-2013, 09:02 PM

Mock up and layout of console

martin · #2 11-03-2013, 09:09 PM

I will fillet the corners , wax and PVA the mold... there is a 3" toe kick all the way around.. which will be built after the console layed up

martin · #3 12-09-2013, 10:11 PM

Not much going on started to demo the front fish box and infloor live well rain cam so had to stop..

CoreyTrx · #4 12-10-2013, 10:42 AM

Where did you get the wood for the mold? I know it MDF but its coated on one side. It looks like melamine. The only melamine I can find around here is made with cheap particle board.

martin · #5 12-10-2013, 12:43 PM

Quote:

Originally Posted by CoreyTrx

Where did you get the wood for the mold? I know it MDF but its coated on one side. It looks like melamine. The only melamine I can find around here is made with cheap particle board.

My buddy ordered it through his cab co...$38 sheet

martin · #6 12-10-2013, 12:46 PM

If you need some I might be able to deliver to philly. HD OR LOWES SHOULD BE ABLE TO GET or any cabinet co

CoreyTrx · #7 12-10-2013, 02:06 PM

thanks I'll have to look around. Is there a special name for it? So its just mdf with a coating on one side and used in cabinet making?

martin · #8 12-11-2013, 03:34 PM

noJust melamine one side.. You can get two sides if you want

fishinonthebrain · #9 12-16-2013, 11:29 PM

Hey Martin any updates on the console you are making. About to start making one myself.

martin · #10 12-22-2013, 12:57 PM

Quote:

Originally Posted by fishinonthebrain

Hey Martin any updates on the console you are making. About to start making one myself.

yes i just gelcoated it last night.. Will start laying glass tonight.i will keep you posted.. did not take pictures. I will when I get home from work. It is pretty basic. I waxed the mold then sprayed a water base release agent. I then Rolled out my NON wax gel-coat will start laying glass tonight staying with in coat window of polyester resins..