"THE VORTEX"

[FELLOW-SHIP]

Due to this new and dynamic, product which will prove to change your whole life I felt a entire new topic of “THE VORTEX” was in order.

“THE VORTEX IS COMING”

Well friends I am happy to report that the Bata testing is over and this “all new” product design will be ready very very soon. Saturday I took several variations of “ THE VORTEX” out to sea in 2’ to 4’ seas with a occasional 5 footer drifting yes friends drifting allowing the waves to rock and rock, bouncing up and down up and down side to side, side to side for over 5 consecutive hours of “THE VORTEX” testing with two full size men standing, and bouncing and rocking as close to the transom as possible and all types of “THE VORTEX” past all fazes of field testing with flying collars. Yes friends (you will never ever see two fountains of water spitting up gallons of water from your port and starboard scupper again). “THE VORTEX” will eliminate all water, yes friends ALL WATER from coming into your boat from those scuppers that have plagued the SeaCraft community for over 30 years. I will be posting Design Plans, Tool List, Parts to Purchase and Step by Step procedures to make your own. Yes friends I am going give you F R E E OF C H A R G E all specks for “THE VORTEX” so you can make them on your own. My out lay or cost for both scuppers has come in as previously stated for under $1.00 and that is for Both scuppers, but you might want to go with one of the deluxe models that could cost just a little additional money, you can be the judge of the extra outlay of additional funds. As time permits either today or tomorrow time permitting I will post all info so you will be able to make “THE VORTEX” ON YOUR OWN.

President and CEO of “THE VORTEX”

FellowShip [img]images/icons/grin.gif[/img] [img]images/icons/wink.gif[/img] [img]images/icons/grin.gif[/img]