I need some HELP!

Captn C · #1 09-24-2004, 07:37 AM

For what ever reason the SeaCraft line is are not being sold in the Houston area right now. I have been keeping an eye out for a new 25' SeaCraft at Bass Pro Shop so I can get some photos of how they are building/re-enforcing the transoms. I know they have added knees and some internal angle to brace the transom, but the boat I was looking at here at Bass Pro Shop was supposed to have been sold to someone in Mobile Alabama. But with the way Tracker Marine has acted since I have been dealing with them it wouldn't surprise me if they moved the boat just to keep me from having access to it.....Paranoid?....Maybe....if you had went though what I and others have you would be too!

Any way.....If any one reading this post spots one of the new 25' SeaCraft boats (I know the 2003 have the improved transom) , could you take a few pictures of the inside of the transom. There is a large hatch in front of the engines that you can open to take the photos. I mainly want the "knees" they have added to the top of the stringers and the angle that have along the inside/top of the transom.

nestorpr · #2 09-24-2004, 09:46 PM

Captn,

I just read an article in BOATUS magazine about a similar problem to yours but this was a Mako, as you know, also built by Tracker. They went through a rough time also but their lawyer came through for them. Hope you can sick a lawyer on these people ASAP and get this problem solved, good luck!

Captn C · #3 10-06-2004, 01:56 PM

I just found out that the SeaCraft line is listed as "inactive" with the USCG. So they may not be building any boats right now.

Still if you happen to see one around dirct them to this site. Maybe I can get them to help me.

Thanks

DonnaSea · #4 10-06-2004, 04:13 PM

This past weekend I was at BPS in Hampton Va and they had a 32' and I think a 20'. Airtime Sports in Va Beach had a 25' a couple of weeks ago. It's going to be about 3 weeks before I get down there again. If they are still there, I'll try to take a look.

Captn C · #5 10-07-2004, 07:24 AM

Thanks!
I would really appreciate it if you could take a photo or two of the knee's and the angle they have used to shore up the transom.