|
|
#1
09-05-2005, 09:04 PM
|
|||
|
|||
t-top to doghouse conversion
Any body ever gone from a t-top to a doghouse. I just purchased an inboard currently with an old t-top on it. I want to build a doghouse for her. I don't know if this is a problem or not, but she is an inboard. I would like to use the current console and add on a doghouse. I was wondering if anyone had any ideas on how to do this, or if it would be too much of a pain, and not as structurally sound. Or should I just build a whole new console/doghouse? Thanks for any ideas.
|
|
#2
09-05-2005, 09:39 PM
|
|||
|
|||
|
Re: t-top to doghouse conversion
well, not sure about the doghouse but i made a phone booth for mine- i have a 3 speed heater running off the heat exchanger and i plan on completing the enclosure maybe this winter. i know it doesnt get near as cold here as it does up there so i dont know if that would do you any good. the heater kicks butt and should heat the whole enclosure up fine. [img]/images/graemlins/smile.gif[/img]
__________________
"Lifes too short to own an ugly boat"
|
|
#3
09-07-2005, 04:54 PM
|
|||
|
|||
|
Re: t-top to doghouse conversion
hi chance you can have a dog house by hinging it to lay down forward / and by cuttind off the aft of the console and reglassing it to the house you can keep the seacraft look on the console/ would make the lower part of the console to be removable for acess to the engine / the hard part would be locking the house down to the deck
|
 |
|
|
Linear Mode
