Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > For Sale
FAQ Community Calendar Today's Posts Search

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 11-15-2005, 04:02 PM
jilliantilsner jilliantilsner is offline
Junior Member
 
Join Date: Nov 2005
Location: Cape May, New Jersey
Posts: 9
Default 1973 20 Foot SeaCraft Potter Hull

My 1973 SeaCraft 20'Center console was completely restored in 2000, including a new 115 horsepower Yamaha motor and new controls. We started by refining the hull in powder blue imron. The bottom was stripped and barrier coated, then painted with shark white Interlux. New aluminium fuel tank was installed as well as a complete steering system. The custom aluminium arch and canvas bimini top were added in 2003. Console canvas and seat covers are in good shape. Front bow & seat cushions are in great condition. Electronic included a Garmin 180 chart plotter with New Jersey and Florida chips. JVC marine AM/FM,CD player. Remote control spot light. Standard Horizon marine VHF radio. The boat is equipted with 2 Rule bilge pumps and a self baling hull. In 2005 I purchased a Tidewater trailer with tandem axles. The trailer has 4 wheel disc brakes, bearing buddies and non marking rollers. The trailer is in new condition. I have kept this boat in excellent condition performing frequent tune-ups and proper winterizations. This boat is a turn key package. I would not hesitate to trailer and run the boat anywhere. Any question please call 609-522-2296.
Reply With Quote
  #2  
Old 11-15-2005, 04:23 PM
Trayder Trayder is offline
Velvet Jones
 
Join Date: Feb 2002
Location: Newport RI / Key West FL
Posts: 1,642
Default Re: 1973 20 Foot SeaCraft Potter Hull

If you have any pictures email them to me and I will post them for you. Sounds like a nice boat

Jason
Reply With Quote
  #3  
Old 11-15-2005, 05:57 PM
Trayder Trayder is offline
Velvet Jones
 
Join Date: Feb 2002
Location: Newport RI / Key West FL
Posts: 1,642
Default Re: 1973 20 Foot SeaCraft Potter Hull

Picture:

Reply With Quote
  #4  
Old 11-16-2005, 02:16 PM
muddywater muddywater is offline
Senior Member
 
Join Date: Nov 2003
Location: Abbeville, LA
Posts: 220
Default Re: 1973 20 Foot SeaCraft Potter Hull

Questions...
Original transom? If not, was it raised to 25"?
Engine type (carb? EFI? DFI? 20" shaft?)
Was the deck rebuilt or raised?
What type of new steering system (wire, hydraulic)?
Guesstimation of hours on the motor?
Can the arch be used as a wakeboard tower or is it strictly a covering?

She's pretty btw [img]/images/graemlins/smile.gif[/img]

Thanks!!!
Reply With Quote
  #5  
Old 11-16-2005, 03:57 PM
jilliantilsner jilliantilsner is offline
Junior Member
 
Join Date: Nov 2005
Location: Cape May, New Jersey
Posts: 9
Default Re: 1973 20 Foot SeaCraft Potter Hull

More pictures on the 1973 20 foot SeaCraft


















Reply With Quote
  #6  
Old 11-16-2005, 06:41 PM
Lenny Lenny is offline
Senior Member
 
Join Date: Oct 2005
Location: Monmouth Maine
Posts: 154
Default Re: 1973 20 Foot SeaCraft Potter Hull

Can you email me in private about this boat HSVector@comcast.net
__________________
Under the knife 1969 20 CC I/O
Reply With Quote
  #7  
Old 11-16-2005, 09:10 PM
jilliantilsner jilliantilsner is offline
Junior Member
 
Join Date: Nov 2005
Location: Cape May, New Jersey
Posts: 9
Default Re: 1973 20 Foot SeaCraft Potter Hull

Answers to your questions:
Original transom? Yes it is the original Transom
Engine type? Carb
Was the deck rebuilt or raised? No, it is all original
What type of new steering system? Cable Steering, Teleflex Steering System
Guesstimation of hours on the motor? 365 (just put more pictures on today with hour meter gauge)
Can the arch be used as a wakeboard tower or is it strictly a covering? Strictly a covering.
Please feel free to ask any more questions. Thanks
Reply With Quote
  #8  
Old 11-17-2005, 05:32 PM
ToyBoy ToyBoy is offline
Junior Member
 
Join Date: Nov 2005
Location: Westport, CT
Posts: 4
Default Re: 1973 20 Foot SeaCraft Potter Hull

Have you set a price for your boat and can you share it with us?
Reply With Quote
  #9  
Old 11-18-2005, 11:12 AM
jilliantilsner jilliantilsner is offline
Junior Member
 
Join Date: Nov 2005
Location: Cape May, New Jersey
Posts: 9
Default Re: 1973 20 Foot SeaCraft Potter Hull

The price is $13,500. For boat, trailer, and engine.
Reply With Quote
  #10  
Old 12-21-2005, 06:39 PM
Captainkass Captainkass is offline
Senior Member
 
Join Date: Dec 2005
Location: Edgecomb Maine
Posts: 103
Default Re: 1973 20 Foot SeaCraft Potter Hull

hello, was wondering did that hand rail come with the boat or is it an add on also is that the original console, by the way that is a nice boat [img]/images/graemlins/cool.gif[/img]
__________________
Kevin
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:48 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft