garage sale!!

chrisvazquez1 · #1 02-08-2009, 08:13 PM

i have an 8' x 4' partially used piece of coosa board, bluewater 26. to my door it cost about 500 bucks. i used a section of it to replace the transom on a 20' 1974 seacraft. theres pleanty to do a transom on another 20 ftr or even an 18 ftr. Also i have the console bench seat cushions. They are the original cushions and are in immaculate condition. they are off-white with black trimming. I have a set of morse controls as well they are universal so they should fit any motor. they are the racing type a gas throttle and fnr. They are used but in great condition.i purchased them for about $200. i have no set prices on any of these items but feel free to contact me with any questions. make me an offer i cannot refuse. i am willing to ship the cushions or/ and the control throttle but will be on the purchasers behalf. thank you, chris vazquez
305-797-0252

muddywater · #2 02-10-2009, 01:47 AM

I did not see a location in your profile. I would be interested in the Coosa if there was enough to do a transom, but I suspect that you are too far away to drive. Is something like that shippable?

chrisvazquez1 · #3 02-10-2009, 03:53 AM

Its definately shippable. im not sure how much it would cost but i payed about $100 for shipping and it was delivered within florida. Im located in gainesville, fl which is about an hour south of georgia.

muddywater · #4 02-10-2009, 02:36 PM

I went out and measured my transom. Please forgive my disbelief but I don't see how one could get two transoms out of an 8x4 sheet of Coosa???? I am still looking into shipping but haven't had much luck so far.

chrisvazquez1 · #5 02-10-2009, 08:18 PM

It is partially used but i replaced the transom from the outside and the transom wasnt rotted all the way up. therefore i used a section of the 4' x8' sheet. it ma be tight but depending on how you are replacing it it should be enough. i would definately recommend you seeing some pictures if you are seriously interested. if you send me an email with your addres ill get you some pictures. chrisvazquez1@gmail.com

muddywater · #6 02-11-2009, 12:53 PM

Ok.. sorry about all the trouble. I finally got the freight quotes and it just would not be cost effective for me to ship it. It sounds like it would be great for someone in Florida who could pick it up though.

thanks!