|
|
#1
12-09-2012, 09:30 PM
|
|||
|
|||
Sanded thru the prime now what?
I rolled on 3 coats of Awlquick primer to the cockpit, gunwale and v berth area. I sanded thru on some of the high spots down to the gelcoat and in some areas that i repaired down to fiber glass. Do i need to reprime theeses areas or can i apply my top coat. What is the best way to fix them?
I will be rolling on a coat of the 545 primer before top coating. 
|
|
#2
12-09-2012, 10:36 PM
|
|||
|
|||
|
more primer till its flat and your happy
__________________
1976 Seacraft CC(Pilot House) Inboard Yanmar 315 1979 Septer I/O no power Sold 
|
 |
|
|
Linear Mode
