water in bildge 18sf 1977. advise pls

[dginge]

I have a 15 yr old rude on my 18sf
Notice water in the bildge after a days use. Like maybe
a gallon or two..... Checked (re sealed) live well again, Scuppers, drain plugs,
Etc etc. I have no through hull fittings. Driving me nuts...
Any ideas or experience as to where it may be coming in?
Everything looks healthy to me.... It isn't a lot but who wants water
In their bildge? I guess the 15 year engine install could be
Making it leak around the engine bracket? Haven't checked the transducer
But doubt that's it with just screws in the glass....
Help or.advise appreciated

[76Red18]

Drain in the front underdeck box.

[ScottM]

Check your hull to deck joint under the rub rail.

[uncleboo]

Mine was leaking around the bolts that hold the motor on.

[Bigshrimpin]

Originally Posted by 76Red18

Drain in the front underdeck box.

Had this same problem . . . this was it.

[Wildman]

Floor scuppers? I bet the tubes are rotted out.