|
|
#1
08-20-2016, 12:47 PM
|
|||
|
|||
Center console
Gents - doing some tank surgery on my 83 20'SF with the large console, everything is dismounted. Does anyone have the orginal setback measurement for the front walk-thru. I neglected to record that measurement many years ago while painting and always felt I was abit too far aft. Thanks for all feedback.
|
|
#2
08-20-2016, 08:17 PM
|
|||
|
|||
|
I had an 85 20' and I think it was around 17-18"
|
|
#3
08-24-2016, 12:49 PM
|
|||
|
|||
|
RC finally had a chance to get measurements of what I believe to be factory original. From front wall of casting platform to front flange of consul is 32". The starboard side of consul, at front edge is 11" across the "gutter", for lack of better term, to inside of gunwhale at floor. These are exact measurements from my 79 20 MA, with large consul. Hope this helps.
Vezo, Part II
|
 |
|
|
Linear Mode
