|
|
#1
11-23-2003, 08:49 PM
|
|||
|
|||
Stripe & Decal removal
Anyone have a trick to stripe/decal removal? I'm removing the boot stripe tape and It's going to take 2 lifetimes at this rate. I'm using a heat gun and scraping with a plastic putty knife to get a piece started then sometimes getting lucky with pulling a couple inches before it breaks. With 46 foot of three stripes it's going to take a lot of beer and cussing!
__________________
Tarpon Tom 
|
|
#2
11-23-2003, 09:01 PM
|
||||
|
||||
|
Re: Stripe & Decal removal
Tarpon Tom
Try "XYLENE"----> a evaporating solvent for specialty coatings and glue. Vapor is strong so wear a mask. [img]images/icons/shocked.gif[/img]
__________________
   1978 23' Superfish/Potter Bracket 250HP -------- as "Americans" you have the right to ...... "LIFE, LIBERTY and the PURSUIT of a Classic SeaCraft" -capt_chuck
|
|
#3
11-23-2003, 10:36 PM
|
|||
|
|||
|
Re: Stripe & Decal removal
Tom, I used a razor blade scraper type tool that is used to remove inspection stickers from car windows etc. It removed mine very easily. Follow up with a solution such as goo-gone to remove the sticky residue...Toadfish
|
 |
|
|
Linear Mode
