|
|
|
|
#1
05-31-2007, 06:22 PM
|
|||
|
|||
Re: motor height and nameplate
The outer edges of your cavitation plate should be just slightly above the bottom of the hull in front of them, so that no part of the plate extends below the hull.
__________________
Common Sense is learning from your mistakes. Wisdom is learning from the other guy's mistakes. Fr. Frank says: Jesus liked fishing, too. He even walked on water to get to the boat! Currently without a SeaCraft  (2) Pompano 12' fishing kayaks '73 Cobia 18' prototype "Casting Skiff", 70hp Mercury 
|
|
#2
06-01-2007, 01:44 AM
|
|||
|
|||
|
Re: motor height and nameplate
Looks like it needs to move up 3 holes. Each hole will move it up 3/4in.
|
 |
|
|
Hybrid Mode
