Professional Secraft restorers in Florida/

PressureDrop · #1 12-05-2007, 12:45 AM

Dont forget Wildfire marine up in stuart? suprised no one mentioned them yet

3rdday · #2 12-05-2007, 01:02 AM

thanks Ben. BTW I sent you a PM last week did you get it?

PressureDrop · #3 12-05-2007, 09:22 AM

3rdday - never got anything, might want to try again

3rdday · #4 12-05-2007, 07:22 PM

did you get a PM from me this AM? It may not be working.

Briguy · #5 12-07-2007, 03:59 PM

Don't let the "rot" hype get your mind all twisted around. My 1978 still has 99% of the wood in the hull in tact and strong. There is a very small soft section on the bow casting deck and when I added the cap of the transom there was minor softness in the transom which I dug out and fixed. Wood is still used in Grady Whites and when encapsulated will last another 25+ years.

If your main goal is to save weight, then perhaps I could agree with you.

3rdday · #6 12-09-2007, 09:52 PM

My goal is to do this once and only once, I would also like the boat to be "bullet proof" I plan on putting this Seacraft through its paces.

76Red18 · #7 12-09-2007, 10:21 PM

Seacrafts are already bullet-proof.

.A few of them even had .50 caliber machine guns on the bow and were used as pt boats. How badazz is that??

zach · #8 12-05-2007, 06:21 PM

Quote:

Dont forget Wildfire marine up in stuart?

I know Mike doesn't like to do anything but wood. Not a bad thing, though, if you know what you're doing. I'm taking my boat to him on Saturday. Thought I was dead set on a non-wood deck and transom, he convinced me otherwise.