![]() |
#111
|
|||
|
|||
![]()
Hey Bob, If I had known that my 1 post would rate me getting my picture posted, I'd have chimed in long ago. I remain totally in awe of your boat. Dude(PR director)
|
#112
|
|||
|
|||
![]()
very impressed with the work and some of the things I have seen them do I have only seen in high end boat yards, and I have been to them all!
__________________
36' Yellowfin 1972 20' seacraft 140 suzuki http://www.classicseacraft.com/commu...ad.php?t=18607 |
#113
|
|||
|
|||
![]()
Bonefish,
Get Down! I am most impressed. How is the 300 working out? What pitch prop are you running? Performance numbers? Your work will not go unrewarded... ![]() |
#114
|
|||
|
|||
![]()
Bonefish......how much did you raise the new floor???
That is one amazing boat.......!!!!!!!!! |
#115
|
|||
|
|||
![]()
The floor was raised about 2". The boat is about finished now and I'll post pictures, but here are some progress pics to catch up.
Console is now being completed. The plates have been welded into the proper position to accept the hard top. ![]() ![]() ![]() Battery box and inside of the console. ![]() ![]() ![]() This is cool: wires from the black box VHF and stereo travel through the back of the drawer box and into the top drawer. The microphone for the VHF and my ipod can be put in the top drawer. ![]() ![]() Battery charger, fresh water pump, and the actuator for the roll-up dash. ![]() Finishing the wiring for the breaker box. ![]() |
#116
|
|||
|
|||
![]()
What a shine. That SeaCraft is one beautiful example of craftsmanship. Can't wait to see some pics of that deck covered with blood and guts
![]() ![]()
__________________
" I'm the one thats got to die when its time for me to die; so let me live my life, the way I want to". J. M. Hendrix |
#117
|
|||
|
|||
![]()
this is one of the best rebuilds I have seen in a long time with some unbeleivable craftsman ship in wood working. keep up the good work. make sure all those wires and hoses are neat and tight inside that console you want to keep here pretty inside and out!! is the 110 volt plug for the ram or something else?
__________________
36' Yellowfin 1972 20' seacraft 140 suzuki http://www.classicseacraft.com/commu...ad.php?t=18607 |
#118
|
|||
|
|||
![]()
Do you want to sell it when your done and if so how much?
![]() strick
__________________
"I always wanted to piss in the Rhine" (General George Patton upon entering Germany) |
#119
|
|||
|
|||
![]()
The 110v plug underneath the console was placed so that I didn't have to hard wire the battery charger. It is wired to an external plug in that is located under the gunwale, so that it is hot when plugged into an external source.
Here are some progress pics of the top that I forgot in my last post. It was painted, pre-wired, and then placed. ![]() ![]() ![]() ![]() Almost there! |
#120
|
|||
|
|||
![]()
All i can say is "WOW",when i see work like this.
What a beautiful looking boat,and truly amazing craftsmanship. When i look at my Tsunami project,I'm very happy with it and proud of my work,but then i see what amazing work is being done by guys like you and Strick,and i am in awe. Absolutely beautiful,Congrats.
__________________
All this,just for a boat ride |
![]() |
|
|