Filling screw holes in Seafari transom

[McGillicuddy]

Thanks for the heads up on the talc. I got epoxy from John Greer to fill a bunch of holes on the gunwales, dash and floor. Should I get some cabosil or can I use some 4200 or 5200 to fill said holes; or is there something else I should use?

[CaptLloyd]

For filling screw holes, try this stuff

http://www.marinetex.com/PRODUCT%20P...rod%20info.htm

[billythekid]

make sure you drill them out a little to give the epoxy a better bond.

[kennmazz]

Drill them out a little. Grind back the gelcoat about half an inch around. Fill the holes with Duraglas. If below the waterline, cover the Duraglas with resin or epoxy. Sand smooth and recoat with gelcoat.