|
|
|
|
#1
10-30-2008, 07:36 AM
|
|||
|
|||
Re: Plexiglas shields
The ones I need are the two glovebox / gauge shields - depending on the model...
__________________
"The sea is selective... slow at recognition of effort and aptitude, but fast at sinking the unfit" ...Felix Riesenberg 
|
|
#2
10-30-2008, 08:07 AM
|
|||
|
|||
|
Re: Plexiglas shields
SeacraftSavage,
OK, now we're getting somewhere. You need a pattern of the plexiglas instrument gauge panel and the glove compartment door from a Savage model seacraft. I know there are fellow owners of savages on the forum, and am sure one of them will chime in. The only question I can think of is what year is your boat, so that someone can be resonably sure that he/she will be giving you the correct pattern in case there were changes made over the years of manufacture. Another thought is that you take this opportunity to customize the panels. I plan to do it when I get to that point. I have purchased a FloScan fuel gage and would like to rearrange the instrument layout in general. Also, these days most everyone is using a GPS/Plotter as primary navigation purposes. Because of this, I thought it might be an idea to switch to a panel mounted compass like you would find in an aircraft instument panel, thus clearing the top of the instrument "pod" for mounting a GPS/Plotter. Heck, I might even modify the the entire instrument area and extend it up and flush mount every thing on an single enlarged panel. Good luck.
__________________
Getting home is more important than getting there! Plan accordingly!
|
|
#3
10-30-2008, 03:21 PM
|
|||
|
|||
|
Re: Plexiglas shields
BigLew-
Thanks for the reply... my Savage is a CC and I can only imagine that my 1977 hull came with 2 glove boxes with the plexiglas shields around the perimeter. If I'm not mistaken, the Sceptre has a glovebox on the port side and a gauge pod in the starboard one...
__________________
"The sea is selective... slow at recognition of effort and aptitude, but fast at sinking the unfit" ...Felix Riesenberg
|
|
#5
10-31-2008, 06:20 PM
|
|||
|
|||
|
Re: Plexiglas shields
Bob-
I think that would work, I'm envisioning tracing the front, side and top views onto paper - do you have a fax ? -thanks, Ralph
__________________
"The sea is selective... slow at recognition of effort and aptitude, but fast at sinking the unfit" ...Felix Riesenberg
|
|
#6
11-05-2008, 12:33 PM
|
|||
|
|||
|
Re: Plexiglas shields
No fax. (I can barely use a computer!!) PM me your address and I'll be happy to mail it to you.
Cheers, Bob PS Do you have any pictures of your cuddy hatch? Mine's not original and leaks bad. I'd like to make it right again.
|
|
#7
11-05-2008, 08:55 PM
|
|||
|
|||
|
Re: Plexiglas shields
Here's some of hatch/door on my Savage
Sorry for the poor quality... Any q's let me know - I PM'ed you      
__________________
"The sea is selective... slow at recognition of effort and aptitude, but fast at sinking the unfit" ...Felix Riesenberg
|
 |
|
|
Hybrid Mode
