Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > Repairs/Mods.
FAQ Community Calendar Today's Posts Search

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 05-26-2011, 02:58 PM
heynow2203 heynow2203 is offline
Senior Member
 
Join Date: Dec 2010
Location: Dennis, MA
Posts: 394
Default Re: 23' inboard Restoration

my cap is still loose from all the restoration also the panel I'm just laying out on a table then cutting the sheet to the shape if you want to use the table come on over! then im going to core it with core cell then seal the edge's with 830 putty and paint.
__________________
1976 Seacraft CC(Pilot House) Inboard Yanmar 315
1979 Septer I/O no power Sold
Reply With Quote
  #2  
Old 05-27-2011, 09:17 AM
Wildman Wildman is offline
Senior Member
 
Join Date: Jul 2010
Location: Eastham MA
Posts: 409
Default Re: 23' inboard Restoration

ahh I didn't realize, looked like you had re-attached it. I am still on the fence about how to replace mine. Its a project for down the road even though it kills me to see the rotten plywood sitting there.
__________________
Patrick from WAY out on cape cod.
1973 23foot Center console, Birdsall Ttop, Hermco Bracket... in progress
Reply With Quote
  #3  
Old 06-09-2011, 08:34 PM
heynow2203 heynow2203 is offline
Senior Member
 
Join Date: Dec 2010
Location: Dennis, MA
Posts: 394
Default Re: 23' inboard Restoration

anybody on the cape have a good table to lay up some deck skins need to lay up 8 of them 4x8 and i can't see to get a table to work correctly suggestions ? keeps getting destroyed ? or could do the for me and core them with my pensky board and all my material?
__________________
1976 Seacraft CC(Pilot House) Inboard Yanmar 315
1979 Septer I/O no power Sold
Reply With Quote
  #4  
Old 06-09-2011, 08:37 PM
heynow2203 heynow2203 is offline
Senior Member
 
Join Date: Dec 2010
Location: Dennis, MA
Posts: 394
Default Re: 23' inboard Restoration

also anybody need a garmin 6208 its new!!
__________________
1976 Seacraft CC(Pilot House) Inboard Yanmar 315
1979 Septer I/O no power Sold
Reply With Quote
  #5  
Old 06-12-2011, 02:37 PM
heynow2203 heynow2203 is offline
Senior Member
 
Join Date: Dec 2010
Location: Dennis, MA
Posts: 394
Default Re: 23' inboard Restoration

well have to do it I'm in to deep need to sell asap open to offers have alot into her and can't keep going work just isn't picking up so the boat has to go I will post in forsale section the listing
__________________
1976 Seacraft CC(Pilot House) Inboard Yanmar 315
1979 Septer I/O no power Sold
Reply With Quote
  #6  
Old 06-18-2011, 01:53 PM
heynow2203 heynow2203 is offline
Senior Member
 
Join Date: Dec 2010
Location: Dennis, MA
Posts: 394
Default Re: 23' inboard Restoration

got primer shot onto the hull sides boat looks good!!!
__________________
1976 Seacraft CC(Pilot House) Inboard Yanmar 315
1979 Septer I/O no power Sold
Reply With Quote
  #7  
Old 06-20-2011, 03:55 PM
heynow2203 heynow2203 is offline
Senior Member
 
Join Date: Dec 2010
Location: Dennis, MA
Posts: 394
Default Re: 23' inboard Restoration

anybody yet want to sell a pilot house thats 38" or wider and 48" deep or knows of someone with a mold that size fib fab I think is to small! Still putzing around on the boat just trying to get this thing together
__________________
1976 Seacraft CC(Pilot House) Inboard Yanmar 315
1979 Septer I/O no power Sold
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:11 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft