The thin strip of teak on top of the console...

[TooFly]

How does one get this thing off? I checked real quick and couldn't find any screws anywhere. Is it glued on?

Thanks,
Paul

[TooFly]

That's for the 20' CC, by the way.

Thanks,
Paul

[TooFly]

Anyone? Anyone?

[Mikem8560]

I have a 82. The only teak is around the dash co ers and the lower storage

[workinpr0gress]

Mine has four screws from the bottom side, three that I could access and the fourth inside the glovebox couldn't be found, or I should say it wasn't worth dealing with getting it off in my case. I had the three screws out and was going to sneak the teak off of the fourth screw after wetting it down to soften it up around the threads. If I got it out in one piece I would have epoxied the teak back the the screw. Mine was pretty grainy. I thought I was gonna replace mine but I was able to refinish it well enough in place so I just did that.

[Mikem8560]

Must have changed it in the 80s

[TooFly]

Mine has four screws from the bottom side, three that I could access and the fourth inside the glovebox couldn't be found, or I should say it wasn't worth dealing with getting it off in my case. I had the three screws out and was going to sneak the teak off of the fourth screw after wetting it down to soften it up around the threads. If I got it out in one piece I would have epoxied the teak back the the screw. Mine was pretty grainy. I thought I was gonna replace mine but I was able to refinish it well enough in place so I just did that.

Ah. I quickly looked underneath the console with a flashlight and couldn't see any screws. I'll check again.

Yours looks nice. Mine is in great shape, but I wanted to get all of the teak off my boat. It's beautiful stuff and I appreciate the look. But I want low maintenance as far as that stuff goes.

[TooFly]

Must have changed it in the 80s

Yup. I like your console better since it's taller and has more space for mounting electronics.

...

Wanna trade?

[uncleboo]

Ah. I quickly looked underneath the console with a flashlight and couldn't see any screws. I'll check again.

You'll have to stick your head WAY up under to see them. When I refinished my teak, I couldn't see them, had to screw blindly!

[TooFly]

had to screw blindly!

I've done that before. No problem!

I'll really cram my big noggin up there. Thanks, bro!