|
|
|
|
#1
10-21-2011, 11:01 AM
|
|||
|
|||
That's nice how you have it serving double duty.
__________________
Thank goodness that in the scheme of things you are broke, powerlesss and inconsequential, because with the shortsighted alternatives and idealogy you have you'd be much worse than those you complain about. 
|
|
#2
10-21-2011, 07:48 PM
|
|||
|
|||
|
It is a nice part. And a nice mold.
I've got a couple questions about your process. The first one may be a dumb one. Do you buff out the mold release wax, or leave a thick coating like in the picture? Judging by the gloss finish on the part, I'm guessing you buff it out. And what's your layup schedule? I see a lot of mat, but I can't make out if you're also using cloth or roving. The reason I ask is that some of my layups have probably been heavier than they needed to be. It would be a good benchmark to know what kind of layup you're using for a non-structural part like this. Thanks, Dave
__________________
Blue Heron Boat Works Reinventing the wheel, one spoke at a time.
|
 |
|
|
Hybrid Mode
