And So it begins

[DonV]

Hey Patrick, a Mako versus SeaCraft is not a fair fight!! Actually a SeaCraft to most any other boat is not a good comparison. After I drilled the 3 3/4" hole in my hull to install the transducer, just for grins, I checked the thickness of the glass with digital calipers, it's a smooth 0.415 inches. The closer to the keel it's even thicker.

I remember when my brother had to take his 21' Wellcraft back to have the hull replaced, the hull was just at 0.200 inches....real, real thin. It's scary coming in with water coming through cracks in the hull!!