![]() |
#1
|
|||
|
|||
![]()
i need someone te help me out and measure the distance between the 2 notches closest to the keel i am compleatly redoing my trailer and i think the bunks are too close.
Thanks for your help guys! |
#2
|
|||
|
|||
![]()
any help guys much appreciated?
|
#3
|
||||
|
||||
![]()
I have a float on trailer. My 23' sits on a lift so I cannot walk on out and take a measurement.
I can tell you that the bunks are set so they are under the stringers and placed just inside of the chines. 55 1/2" apart. ![]() A contoured guide between the bunks that the keel sits in, keeps the hull centered. ![]() The forward suport bunks are the only ones that are near the keel. ![]()
__________________
![]() ![]() 1978 23' Superfish/Potter Bracket 250HP -------- as "Americans" you have the right to ...... "LIFE, LIBERTY and the PURSUIT of a Classic SeaCraft" -capt_chuck |
#4
|
|||
|
|||
![]()
Mine are very similar
![]() |
#5
|
|||
|
|||
![]()
Thanks guys but I need the measurements. Because as of now I think the bunks are too close and the nut heads are going to take long gashes out of the vertical part of the hull if I go in not centered or at an angle.
Is there anyway I can save money and make my own PVC guides? Thanks |
#6
|
|||
|
|||
![]()
this is the mesurement i need.
|
#7
|
|||
|
|||
![]()
About 30"
|
#8
|
|||
|
|||
![]()
thanks!
|
![]() |
|
|