|
|
|||||||
| View Poll Results: Are you interested in a splashwell for a 20 MA | |||
| No |
   
|
7 | 63.64% |
| Yes. I don't need fancy gel coat. |
  
|
1 | 9.09% |
| Yes, and I want gel coat |
  
|
3 | 27.27% |
| I would pay more for epoxy and/or foam core and or carbon. |
  
|
1 | 9.09% |
| Multiple Choice Poll. Voters: 11. You may not vote on this poll | |||
|
|
Thread Tools | Search this Thread | Display Modes |
|
#12
11-25-2012, 10:38 AM
|
|||
|
|||
I have cut up a lot of MDF. The bump out looks huge, but it is only 7.5" deep so far, with 10 layers of 3/4" MDF. I think I will put the top lip facing inwards, maybe 5/8" and a coaming pad about 2" thick just under it.
The layers aren't bonded together yet, just stacked atop each other. It is about 20" wide at the most top/forward point. A couple more layers and then I break out the 36 grit belt sander to put the giant radii in it. 
|
|
|
Threaded Mode